时间限制: 3.0s 内存限制: 512.0MB 本题总分:10 分
【问题描述】在平时使用电脑的过程中,经常会打开各种各样的窗口,各个窗口会在桌 面上重叠,并按照一定的层次关系显示。有的窗口能够看到全部内容,而有的 窗口只能看到局部。
现在给定一组操作桌面窗口的过程序列,请你通过 ASCII 艺术图来绘制最 后桌面的状态。
已知桌面的大小为 N × M,即桌面高度为 N 个像素,宽度为 M 个像素, 其中左上角坐标为 (0, 0),右下角坐标为 (N − 1, M − 1)。
对于窗口的操作有如下 5 种:
1. new 操作 - 打开一个新窗口
new [PID] [top] [left] [height] [width]
如:new 12 20 30 80 100
表示打开一个 PID 为 12 的窗口,窗口左上角的坐标为 (20, 30),该窗口宽 度为 100 个像素,高度为 80 个像素;新创建的窗口,其层级为顶层。
2. move 操作 - 移动一个窗口
move [PID] [vertical] [horizontal]
如: move 12 -5 10
表示将 PID 为 12 的窗口在垂直方向上移动 −5 个像素,在水平方向上移 动 10 个像素。若窗口左上角原位置为 (20, 30),此时则在 (15, 40);移动后的窗 口,其层级为顶层。
3. resize 操作 - 改变窗口大小
resize [PID] [height] [width]
如:resize 12 90 110
表示保持左上角坐标不变的情况下,改变 PID 为 12 的窗口大小,调整为 高度 90 像素,宽度 110 像素;改变大小后的窗口,其层级为顶层。
4. close 操作 - 关闭窗口
close [PID]
如:close 12
表示关闭 PID 为 12 的窗口;
5. active 操作 - 激活窗口
active [PID]
如:active 12
表示激活 PID 为 12 的窗口,此时该窗口的层级被置为顶层。
【输入格式】第 1 行:2 个正整数 N, M,表示桌面大小; 第 2 行:1 个正整数 K,表示操作序列的长度; 第 3 . . . K + 2 行:每行一个操作,格式见题目描述。
【输出格式】第 1 . . . N 行:每行 M 个字符,仅包含 ‘.’, ‘+’, ‘-’, ‘|’, ‘ ’ 五种字符。 ‘.’ 表示桌面背景,即该部分未被任何窗口覆盖,‘+’ 表示窗口的四个角,‘-’ 表示窗口的横边, ‘|’ 表示窗口的竖边,‘ ’ 表示窗口内部。
【样例输入】【样例输出】7 10
8
new 1 0 3 2 5
new 2 4 4 2 5
new 3 3 3 4 6
resize 3 3 6
move 1 0 5
close 2
new 4 1 1 3 5
active 3
........+-
.+---+..+-
.| |....
.+-+----+.
...| |.
...+----+.
..........
【评测用例规模与约定】
对于 100% 的数据,1 ≤ N, M ≤ 256, 1 ≤ K ≤ 10000.
输入数据保证:
1. 同一时间不会有两个相同 PID 的窗口存在,可能存在关闭某个 PID 的 窗口后,再新建一个同样 PID 的窗口,PID 的取值范围为 1 ≤ PID ≤ 100000;
2. 同时存在的窗口数量不超过 200 个;
3. 窗口尺寸不会小于 2 × 2,即窗口高度和宽度均不会小于 2,不会大于 N × M;
4. 窗口在移动过程中,可能有部分界面超出桌面显示范围;
5. 所有输入的数值均不超过 ±100000。
6. move resize close 只会对未关闭的窗口操作。
import java.io.BufferedReader;
import java.io.IOException;
import java.io.InputStreamReader;
import java.util.Arrays;
import java.util.LinkedList;
import java.util.List;
import java.util.StringTokenizer;
public class Main {
public static void main(String[] args) throws IOException {
InputReader in = new InputReader();
int n = in.nextInt(), m = in.nextInt(), k = in.nextInt();
List list = new LinkedList();
Window[] arr = new Window[100005];
for (int i = 0; i < k; i++) {
String op = in.next();
int pid = 0;
switch (op) {
case "new":
pid = in.nextInt();
arr[pid] = new Window(pid, in.nextInt(), in.nextInt(), in.nextInt(), in.nextInt());
list.add(0, arr[pid]);
break;
case "move":
pid = in.nextInt();
list.remove(arr[pid]);
arr[pid].move(in.nextInt(), in.nextInt());
list.add(0, arr[pid]);
break;
case "resize":
pid = in.nextInt();
list.remove(arr[pid]);
arr[pid].resize(in.nextInt(), in.nextInt());
list.add(0, arr[pid]);
break;
case "close":
pid = in.nextInt();
list.remove(arr[pid]);
break;
case "active":
pid = in.nextInt();
list.remove(arr[pid]);
list.add(0, arr[pid]);
break;
}
}
char[][] graph = new char[n][m];
for (int i = 0; i < n; i++) {
Arrays.fill(graph[i], '.');
}
for (int i = list.size() - 1; i > -1; i--) {
Window w = list.get(i);
for (int j = w.top; j < n && j < w.top + w.height; j++) {
for (int u = w.left; u < m && u < w.left + w.width; u++) {
if (j == w.top && u == w.left || j == w.top && u == w.left + w.width - 1 || j == w.top + w.height - 1 && u == w.left || j == w.top + w.height - 1 && u == w.left + w.width - 1) {
graph[j][u] = '+';
}else if (j == w.top || j == w.top + w.height - 1) {
graph[j][u] = '-';
}else if (u == w.left || u == w.left + w.width - 1) {
graph[j][u] = '|';
}else {
graph[j][u] = ' ';
}
}
}
}
for (int i = 0; i < n; i++) {
for (int j = 0; j < m; j++) {
System.out.print(graph[i][j]);
}
System.out.println();
}
}
}
class Window{
public int pid;
public int top;
public int left;
public int height;
public int width;
public Window(int pid, int top, int left, int height, int width) {
this.pid = pid;
this.top = top;
this.left = left;
this.height = height;
this.width = width;
}
public void move(int h, int v) {
this.top += h;
this.left += v;
}
public void resize(int h, int w) {
this.height = h;
this.width = w;
}
}
class InputReader{
BufferedReader buf;
StringTokenizer tok;
public InputReader() {
buf = new BufferedReader(new InputStreamReader(System.in));
}
boolean hasNext() {
while (tok == null || !tok.hasMoreElements()) {
try {
tok = new StringTokenizer(buf.readLine());
} catch (Exception e) {
return false;
}
}
return true;
}
String next() {
if (hasNext()) {
return tok.nextToken();
}
return null;
}
int nextInt() {
return Integer.parseInt(next());
}
long nextLong(){
return Long.parseLong(next());
}
double nextDouble() {
return Double.parseDouble(next());
}
String nextLine() throws IOException {
return buf.readLine();
}
}



