二进制部署高可用k8s集群

文章目录

一、环境准备
- - 1、机器规划
  - 2、软件版本
  - 3、目录结构
  - 4、系统环境配置
二、创建集群根证书
- - 下载并安装cfssl
  - 创建CA签名请求文件ca-csr.json
  - 生成CA根证书及其私钥
  - 配置CA证书签发策略
三、部署etcd集群
- - 下载并安装
  - 创建etcd证书签名请求文件
  - 生成证书及私钥
  - 分发证书
  - 创建配置文件
  - 创建启动服务文件
  - 创建运行用户及组
  - 分发文件
  - 启动集群
  - 验证集群状态
四、部署haproxy+keepalived高可用
- - 部署keepalived
  - 部署HAproxy
五、部署master节点
- 部署Kube-apiserver
- - - 创建csr请求文件kube-apiserver-csr.json
    - 生成token文件token.csv
    - 生成证书
    - 生成 apiserver RBAC 审计配置文件audit-policy.yaml
    - 创建配置文件kube-apiserver.conf
    - 创建服务启动文件kube-apiserver.service
    - 分发文件
    - 启动服务
- 部署kubectl
- - - 创建csr请求文件admin-csr.json
    - 生成证书
    - 分发证书
    - 创建kubeconfig配置文件
    - 分发kubeconfig配置文件
    - 授权kubernetes证书访问kubelet api权限
    - 查看集群组件状态
    - 配置kubectl子命令补全
- 部署kube-controller-manager
- - - 创建csr请求文件kube-controller-manager-csr.json
    - 生成证书
    - 分发证书
    - 创建kube-controller-manager的kubeconfig
    - 创建配置文件kube-controller-manager.conf
    - 创建启动文件kube-controller-manager.service
    - 分发文件
    - 启动服务
- 部署kube-scheduler
- - - 创建csr请求文件kube-scheduler-csr.json
    - 生成证书
    - 创建kube-scheduler的kubeconfig
    - 创建配置文件kube-scheduler.conf
    - 创建服务启动文件kube-scheduler.service
    - 分发文件
    - 启动服务
六、部署node节点
- 部署docker
- - - 下载docker rpm包
    - 分发docker安装包
    - 卸载旧版本docker
    - 安装docker
    - 修改docker源和驱动
    - 启动docker服务
- 部署kubelet
- - - 创建kubelet-bootstrap.kubeconfig
    - 角色绑定
    - 创建配置文件kubelet.json
    - 创建启动文件kubelet.service
    - 分发文件
    - 启动服务
    - 查看未授权的csr请求
    - 授权csr请求
    - 查看node节点状态
- 部署kube-proxy
- - - 配置ipvs
    - 创建csr请求文件kube-proxy-csr.json
    - 生成证书
    - 创建kubeconfig文件
    - 创建kube-proxy配置文件kube-proxy.yaml
    - 创建服务启动文件kube-proxy.service
    - 分发文件
    - 启动服务
    - 查看ipvs路由规则
- 配置网络组件
- - - 下载calico
    - 配置etcd
    - 查看网络状态
    - 查看node是否为就绪状态
    - 遇到的问题
- 部署coredns
- - - 下载coredns
    - 修改配置文件
    - 创建对应资源
    - 查看资源创建
    - 查看日志
    - 验证
参考资料

一、环境准备 1、机器规划

IP地址	机器名称	机器配置	操作系统	机器角色	安装软件
192.168.6.1	k8snode01	2C2G	CentOS 7.9	master+worker+etcd	kube-apiserver、kube-controller-manager、kube-scheduler、etcd、kubelet、kube-proxy
192.168.6.2	k8snode02	2C2G	CentOS 7.9	master+worker+etcd	kube-apiserver、kube-controller-manager、kube-scheduler、etcd、kubelet、kube-proxy
192.168.6.3	k8snode03	2C2G	CentOS 7.9	master+worker+etcd	kube-apiserver、kube-controller-manager、kube-scheduler、etcd、kubelet、kube-proxy
192.168.6.253				负载均衡VIP
10.254.0.1/16				service网络
10.0.0.0/16				pod网络
10.254.0.2				coredns地址

此处使用haproxy + keepalived的方式实现实现kube-apiserver的高可用性，VIP为192.168.6.253；三个节点同时为master和worker及etcd集群节点。

2、软件版本

软件	版本	官方下载地址
kube-apiserver、kube-controller-manager、kube-scheduler、kubelet、kube-proxy	v1.22.1	https://github.com/kubernetes/kubernetes/tree/master/CHANGELOG
docker-ce	v20.10.8	https://download.docker.com/linux/centos/7/x86_64/stable/Packages
etcd	v3.5.0	https://github.com/etcd-io/etcd/releases
calico(网络插件)	v3.20.0	https://docs.projectcalico.org/manifests/calico-etcd.yaml
coredns(dns插件)	1.8.4	https://raw.githubusercontent.com/coredns/deployment/master/kubernetes/coredns.yaml.sed
cfssl	v1.6.1	https://github.com/cloudflare/cfssl/releases
haproxy	1.5.18	yum安装
keepalived	v1.3.5	yum安装

3、目录结构

目录	节点	说明
/opt/etcd/ssl	所有	etcd集群运行时所需要的证书
/opt/etcd/conf	所有	etcd集群运行时所需要的配置文件
/opt/etcd/bin	所有	etcd集群运行时所需要的二进制文件
/opt/kubernetes/ssl	所有	k8s集群运行时所需要的证书
/opt/kubernetes/conf	所有	k8s集群运行时所需要的配置文件
/opt/kubernetes/bin	所有	k8s集群运行时所需要的二进制文件(组件的二进制文件)
/var/log/kubernetes	所有	k8s集群运行时日志的存放目录
/opt/cfssl	所有	cfssl二进制运行文件目录
/root/k8s/{etcd,k8s,cfssl,ssl}	k8snode01	部署集群时所使用的目录
/opt/calico	k8snode01	calico组件安装目录
/opt/coredns	k8snode01	coredns组件安装目录

4、系统环境配置

修改主机名
修改主机名及IP，其对应关系如下：

主机名称 IP地址
k8snode01 192.168.6.1
k8snode02 192.168.6.2
k8snode03 192.168.6.3

主机名称	IP地址
k8snode01	192.168.6.1
k8snode02	192.168.6.2
k8snode03	192.168.6.3

配置hosts文件
将以下内容同时添加到三台主机上的/etc/hosts文件中：

cat >> /etc/hosts << EOF
192.168.6.1 k8snode01
192.168.6.2 k8snode02
192.168.6.3 k8snode03
EOF

关闭防火墙和selinux

systemctl stop firewalld
systemctl disable firewalld
setenforce 0
sed -i 's/^SELINUX=.*/SELINUX=disabled/' /etc/selinux/config

关闭交换分区

#临时关闭
swapoff -a

#永久关闭，修改文件/etc/fstab，注释swap选项

时间同步

yum install -y chrony
systemctl start chronyd
systemctl enable chronyd
chronyc sources

修改内核参数

cat > /etc/sysctl.d/k8s.conf << EOF
net.ipv4.ip_forward = 1
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
EOF

sysctl --system

创建所需目录

#etcd运行时所需的证书目录及配置文件
mkdir -p /opt/etcd/{ssl,conf,bin}
#k8s组件运行时所需要的文件
mkdir -p /opt/kubernetes/{ssl,conf,bin}
#kubernetes日志目录
mkdir /var/log/kubernetes
#cfssl安装目录
mkdir /opt/cfssl
#搭建集群时用的的目录,只在k8snode01节点上创建此目录
mkdir -p /root/k8s/{etcd,k8s,cfssl,ssl}

配置系统环境变量

cat >> /etc/profile << 'EOF'
export ETCD_HOME=/opt/etcd
export CFSSL_HOME=/opt/cfssl
export K8S_HOME=/opt/kubernetes
export PATH=$ETCD_HOME/bin:$CFSSL_HOME:$K8S_HOME/bin:$PATH
EOF

source /etc/profile

配置免密钥登陆

#在k8snode01上执行以下命令
ssh-keygen
ssh-copy-id -i ~/.ssh/id_rsa.pub root@k8snode01
ssh-copy-id -i ~/.ssh/id_rsa.pub root@k8snode02
ssh-copy-id -i ~/.ssh/id_rsa.pub root@k8snode03

k8snode01安装所需工具

yum -y install epel-release
yum -y install wget ansible ipvsadm ipset conntrack

二、创建集群根证书

采用比较常用的CloudFlare 的 PKI 工具集 cfssl 来生成 Certificate Authority (CA) 证书和秘钥文件，CA 是自签名的证书，用来签名后续创建的其它 TLS 证书。

证书可以在任意节点生成，然后再拷贝到其他及节点；在这里使用k8snode01节点生成证书，生成证书时所使用的目录为/root/k8s/ssl目录。

在创建CA证书的过程中，如果没有特别说明，则工作目录为：/root/k8s/ssl。因此，在进行下面的操作前需要将目录切换至/root/k8s/ssl。

下载并安装cfssl

工具下载地址：

cfssl_linux-amd64：https://github.com/cloudflare/cfssl/releases/download/v1.6.1/cfssl_1.6.1_linux_amd64
cfssljson_linux-amd64：https://github.com/cloudflare/cfssl/releases/download/v1.6.1/cfssljson_1.6.1_linux_amd64
cfssl-certinfo_linux-amd64：https://github.com/cloudflare/cfssl/releases/download/v1.6.1/cfssl-certinfo_1.6.1_linux_amd64

cfssl下载目录为：/root/k8s/cfssl。

安装cfssl：

cp /root/k8s/cfssl/cfssl_1.6.1_linux_amd64 /opt/cfssl/cfssl
cp /root/k8s/cfssl/cfssljson_1.6.1_linux_amd64 /opt/cfssl/cfssljson
cp /root/k8s/cfssl/cfssl-certinfo_1.6.1_linux_amd64 /opt/cfssl/cfssl-certinfo

chmod +x /opt/cfssl/cfssl
chmod +x /opt/cfssl/cfssljson
chmod +x /opt/cfssl/cfssl-certinfo

创建CA签名请求文件ca-csr.json

ca-csr.json中csr含义是：Certificate Signing Request，证书签名请求；因此看到 xx-csr.json，你就要知道该文件是证书签名请求文件，有了它，cfssl就可以生成证书和证书私钥了。

{
	"CN": "kubernetes",
	"key": {
		"algo": "rsa",
		"size": 2048
	},
	"names": [
		{
			"C": "CN",
			"ST": "BeiJing",
			"L": "BeiJing",
			"O": "k8s",
			"OU": "system"
		}
	],
	"ca": {
		"expiry": "87600h"
	}
}

CN：Common Name，kube-apiserver 从证书中提取该字段作为请求的用户名 (User Name)；浏览器使用该字段验证网站是否合法；

O：Organization，组织名称，公司名称；kube-apiserver 从证书中提取该字段作为请求用户所属的组 (Group)

C：Country，国家。

ST: State，州，省。

L: Locality，地区，城市。

OU: Organization Unit Name，组织单位名称，公司部门。

生成CA根证书及其私钥

cfssl gencert -initca ca-csr.json  | cfssljson -bare ca

执行上述命令后当前目录下会生成三个文件：ca.csr ，ca-csr.json 、ca-key.pem、ca.pem。

配置CA证书签发策略

在使用CA证书签发其他证书时会用到一个策略文件ca-config.json：

{
	"signing": {
		"default": {
			"expiry": "175200h"
		},
		"profiles": {
			"kubernetes": {
				"usages": [
					"signing",
					"key encipherment",
					"server auth",
					"client auth"
				],
				"expiry": "175200h"
			}
		}
	}
}

signing：表示该证书可用于签名其它证书，生成的 ca.pem 证书中 CA=TRUE。

profiles: 指定证书使用场景，同一个文件中可以有多个profiles，后续签名生成证书及其私钥时需要指定该场景(profile)名称。

server auth：表示 client 可以用该证书对 server 提供的证书进行验证。

client auth：表示 server 可以用该证书对 client 提供的证书进行验证。

expiry: 175200h表示20年有效期。

三、部署etcd集群

etcd 是k8s集群最重要的组件，用来存储k8s的所有服务信息， etcd 挂了，集群就挂了，我们这里三台节点上全部部署etcd，实现etcd高可用；

etcd集群采用raft算法选举Leader，由于Raft算法在做决策时需要多数节点的投票，所以etcd一般部署集群推荐奇数个节点，推荐的数量为3、5或者7个节点构成一个集群。

下载并安装

cd /root/k8s/etcd
wget https://github.com/etcd-io/etcd/releases/download/v3.5.0/etcd-v3.5.0-linux-amd64.tar.gz
tar -xvf etcd-v3.5.0-linux-amd64.tar.gz
cp ./etcd-v3.5.0-linux-amd64/etcd* /opt/etcd/bin
scp ./etcd-v3.5.0-linux-amd64/etcd* root@k8snode02:/opt/etcd/bin
scp ./etcd-v3.5.0-linux-amd64/etcd* root@k8snode03:/opt/etcd/bin

创建etcd证书签名请求文件

进入目录/root/k8s/ssl，创建新的文件etcd-csr.json，将以下内容添加到文件中：

{
	"CN": "etcd",
	"hosts": [
		"127.0.0.1",
		"192.168.6.1",
		"192.168.6.2",
		"192.168.6.3",
		"192.168.6.4",
		"192.168.6.5"
	],
	"key": {
		"algo": "rsa",
		"size": 2048
	},
	"names": [
		{
			"C": "CN",
			"ST": "BeiJing",
			"L": "BeiJing",
			"O": "k8s",
			"OU": "system"
		}
	]
}

生成证书及私钥

cd /root/k8s/ssl

cfssl gencert -ca=/root/k8s/ssl/ca.pem 
-ca-key=/root/k8s/ssl/ca-key.pem 
-config=/root/k8s/ssl/ca-config.json 
-profile=kubernetes etcd-csr.json | cfssljson -bare etcd

分发证书

cd /root/k8s/ssl
cp ./ca* ./etcd* /opt/etcd/ssl
scp ./ca* ./etcd* root@k8snode02:/opt/etcd/ssl
scp ./ca* ./etcd* root@k8snode03:/opt/etcd/ssl

正常情况下只需要copy这三个文件即可，ca.pem、etcd-key.pem、etcd.pem。

创建配置文件

创建配置文件模板etcd.conf，并将以下内容写入文件中：

#[Member]
ETCD_NAME="JIE_NAME"
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
ETCD_LISTEN_PEER_URLS="https://IP_ADDR:2380"
ETCD_LISTEN_CLIENT_URLS="https://IP_ADDR:2379,http://127.0.0.1:2379"

#[Clustering]
ETCD_INITIAL_ADVERTISE_PEER_URLS="https://IP_ADDR:2380"
ETCD_ADVERTISE_CLIENT_URLS="https://IP_ADDR:2379"
ETCD_INITIAL_CLUSTER="etcd1=https://192.168.6.1:2380,etcd2=https://192.168.6.2:2380,etcd3=https://192.168.6.3:2380"
ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
ETCD_INITIAL_CLUSTER_STATE="new"

ETCD_NAME：节点名称，集群中唯一
ETCD_DATA_DIR：数据目录
ETCD_LISTEN_PEER_URLS：集群通信监听地址
ETCD_LISTEN_CLIENT_URLS：客户端访问监听地址
ETCD_INITIAL_ADVERTISE_PEER_URLS：集群通告地址
ETCD_ADVERTISE_CLIENT_URLS：客户端通告地址
ETCD_INITIAL_CLUSTER：集群节点地址
ETCD_INITIAL_CLUSTER_TOKEN：集群Token
ETCD_INITIAL_CLUSTER_STATE：加入集群的当前状态，new是新集群，existing表示加入已有集群

创建启动服务文件

创建配置文件etcd.service，并将以下内容写入文件中：

[Unit]
Description=Etcd Server
After=network.target
After=network-online.target
Wants=network-online.target

[Service]
Type=notify
EnvironmentFile=-/opt/etcd/conf/etcd.conf
WorkingDirectory=/var/lib/etcd/
ExecStart=/opt/etcd/bin/etcd 
    --cert-file=/opt/etcd/ssl/etcd.pem 
    --key-file=/opt/etcd/ssl/etcd-key.pem 
    --trusted-ca-file=/opt/etcd/ssl/ca.pem 
    --peer-cert-file=/opt/etcd/ssl/etcd.pem 
    --peer-key-file=/opt/etcd/ssl/etcd-key.pem 
    --peer-trusted-ca-file=/opt/etcd/ssl/ca.pem 
    --peer-client-cert-auth 
    --client-cert-auth
Restart=on-failure
RestartSec=5
LimitNOFILE=65536
User=etcd

[Install]
WantedBy=multi-user.target

创建运行用户及组

以下操作需要在所有的etcd集群节点上运行。

adduser -Ms /sbin/nologin etcd
mkdir /var/lib/etcd/
chown -R etcd:etcd /var/lib/etcd

分发文件

#!/bin/bash

NODE_NAMES=("etcd1" "etcd2" "etcd3")
NODE_IPS=("192.168.6.1" "192.168.6.2" "192.168.6.3")

#替换模板文件中的变量，为各节点创建 systemd unit 文件
for (( i=0; i < 3; i++ ));do
    echo ">>> ${NODE_IPS[i]}"
    sed -e "s/JIE_NAME/${NODE_NAMES[i]}/g" -e "s/IP_ADDR/${NODE_IPS[i]}/g" ./etcd.conf > ./etcd-${NODE_IPS[i]}.conf
    scp ./etcd-${NODE_IPS[i]}.conf root@${NODE_IPS[i]}:/opt/etcd/conf/etcd.conf
    scp ./etcd.service root@${NODE_IPS[i]}:/etc/systemd/system/etcd.service
    ssh root@${NODE_IPS[i]} "chown -R etcd:etcd /opt/etcd"
    rm -f ./etcd-${NODE_IPS[i]}.conf
done

启动集群

systemctl daemon-reload
systemctl enable etcd
systemctl start etcd

验证集群状态

etcdctl --cacert=/opt/etcd/ssl/ca.pem 
--cert=/opt/etcd/ssl/etcd.pem 
--key=/opt/etcd/ssl/etcd-key.pem 
--endpoints="https://192.168.6.1:2379,https://192.168.6.2:2379,https://192.168.6.3:2379" 
endpoint status --write-out=table

四、部署haproxy+keepalived高可用部署keepalived

1、安装keepalived

yum install -y keepalived

2、配置keepalived

keepalived的配置文件位置：/etc/keepalived/keepalived.conf

#备份配置文件
mv /etc/keepalived/keepalived.conf /etc/keepalived/keepalived.conf.bk

#主节点(k8snode01)执行以下命令
cat > /etc/keepalived/keepalived.conf < /etc/keepalived/keepalived.conf < 
 
 主节点与从节点在配置上唯一不同的是state，在主节点上state的值为MASTER，在从节点上state的值为BACKUP。 
 
3、启动并检查keepalived服务 
systemctl start keepalived.service
systemctl status keepalived.service
systemctl enable keepalived.service
 
启动keepalived服务后，使用命令ip a s enp0s8就可以在k8snode01的enp0s8网卡上看到VIP。 
部署HAproxy 
1、安装haproxy 
在所有主节点上执行以下命令： 
yum install -y haproxy
 
2、配置haproxy 
在所有主节点上执行以下命令： 
#备份配置文件
mv /etc/haproxy/haproxy.cfg /etc/haproxy/haproxy.cfg.bk

cat > /etc/haproxy/haproxy.cfg << EOF
#---------------------------------------------------------------------
# Global settings
#---------------------------------------------------------------------
global
    # to have these messages end up in /var/log/haproxy.log you will
    # need to:
    # 1) configure syslog to accept network log events.  This is done
    #    by adding the '-r' option to the SYSLOGD_OPTIONS in
    #    /etc/sysconfig/syslog
    # 2) configure local2 events to go to the /var/log/haproxy.log
    #   file. A line like the following can be added to
    #   /etc/sysconfig/syslog
    #
    #    local2.*                       /var/log/haproxy.log
    #
    log         127.0.0.1 local2
    
    chroot      /var/lib/haproxy
    pidfile     /var/run/haproxy.pid
    maxconn     4000
    user        haproxy
    group       haproxy
    daemon 
       
    # turn on stats unix socket
    stats socket /var/lib/haproxy/stats
#---------------------------------------------------------------------
# common defaults that all the 'listen' and 'backend' sections will
# use if not designated in their block
#---------------------------------------------------------------------  
defaults
    mode                    http
    log                     global
    option                  httplog
    option                  dontlognull
    option http-server-close
    option forwardfor       except 127.0.0.0/8
    option                  redispatch
    retries                 3
    timeout http-request    10s
    timeout queue           1m
    timeout connect         10s
    timeout client          1m
    timeout server          1m
    timeout http-keep-alive 10s
    timeout check           10s
    maxconn                 3000
#---------------------------------------------------------------------
# kubernetes apiserver frontend which proxys to the backends
#--------------------------------------------------------------------- 
frontend kubernetes-apiserver
    mode                 tcp
    bind                 *:16443
    option               tcplog
    default_backend      kubernetes-apiserver    
#---------------------------------------------------------------------
# round robin balancing between the various backends
#---------------------------------------------------------------------
backend kubernetes-apiserver
    mode        tcp
    balance     roundrobin
    server      k8snode01 192.168.6.1:6443 check
    server      k8snode02 192.168.6.2:6443 check
    server      k8snode03 192.168.6.3:6443 check
#---------------------------------------------------------------------
# collection haproxy statistics message
#---------------------------------------------------------------------
listen stats
    bind                 *:1080
    stats auth           admin:awesomePassword
    stats refresh        5s
    stats realm          HAProxy Statistics
    stats uri            /admin?stats
EOF
 
 
 配置文件中指定了haproxy运行的端口为16443端口，因此16443端口为集群的入口。 
 
3、启动并检查服务 
systemctl start haproxy
systemctl enable haproxy.service

#检测服务状态
[root@k8snode02 ~]# netstat -tunlp | grep haproxy
tcp        0      0 0.0.0.0:1080            0.0.0.0:*               LISTEN      7375/haproxy        
tcp        0      0 0.0.0.0:16443           0.0.0.0:*               LISTEN      7375/haproxy        
udp        0      0 0.0.0.0:55425           0.0.0.0:*                           7374/haproxy
 
五、部署master节点 
部署Kube-apiserver 
创建csr请求文件kube-apiserver-csr.json 
{
	"CN": "kubernetes",
	"hosts": [
		"127.0.0.1",
		"192.168.6.1",
		"192.168.6.2",
		"192.168.6.3",
		"192.168.6.4",
		"192.168.6.5",
		"192.168.6.253",
        "10.254.0.1",
		"kubernetes",
		"kubernetes.default",
		"kubernetes.default.svc",
		"kubernetes.default.svc.cluster",
		"kubernetes.default.svc.cluster.local"
	],
	"key": {
		"algo": "rsa",
		"size": 2048
	},
	"names": [
		{
			"C": "CN",
			"ST": "BeiJing",
			"L": "BeiJing",
			"O": "k8s",
			"OU": "system"
		}
	]
}
 
 
 如果 hosts 字段不为空则需要指定授权使用该证书的 IP 或域名列表。 
 由于该证书后续被 kubernetes master 集群使用，需要将master节点的IP都填上，同时还需要填写 service 网络的首个IP。(一般是 kube-apiserver 指定的 service-cluster-ip-range 网段的第一个IP，如 10.254.0.1)。 
 
生成token文件token.csv 
cd /root/k8s/k8s/config

cat > token.csv << EOF
$(head -c 16 /dev/urandom | od -An -t x | tr -d ' '),kubelet-bootstrap,10001,"system:kubelet-bootstrap"
EOF
 
生成证书 
cfssl gencert 
-ca=/root/k8s/ssl/ca.pem -ca-key=/root/k8s/ssl/ca-key.pem -config=/root/k8s/ssl/ca-config.json 
-profile=kubernetes /root/k8s/ssl/kube-apiserver-csr.json | cfssljson -bare /root/k8s/ssl/kube-apiserver
 
生成 apiserver RBAC 审计配置文件audit-policy.yaml 
# Log all requests at the Metadata level.
apiVersion: audit.k8s.io/v1
kind: Policy
rules:
- level: Metadata
 
创建配置文件kube-apiserver.conf 
KUBE_APISERVER_OPTS="--enable-admission-plugins=NamespaceLifecycle,NodeRestriction,LimitRanger,ServiceAccount,DefaultStorageClass,ResourceQuota 
--anonymous-auth=false 
--bind-address=local_ip 
--secure-port=6443 
--advertise-address=local_ip 
--insecure-port=0 
--authorization-mode=Node,RBAC 
--runtime-config=api/all=true 
--enable-bootstrap-token-auth 
--service-cluster-ip-range=10.254.0.1/16 
--token-auth-file=/opt/kubernetes/conf/token.csv 
--service-node-port-range=30000-50000 
--tls-cert-file=/opt/kubernetes/ssl/kube-apiserver.pem  
--tls-private-key-file=/opt/kubernetes/ssl/kube-apiserver-key.pem 
--client-ca-file=/opt/kubernetes/ssl/ca.pem 
--kubelet-client-certificate=/opt/kubernetes/ssl/kube-apiserver.pem 
--kubelet-client-key=/opt/kubernetes/ssl/kube-apiserver-key.pem 
--service-account-key-file=/opt/kubernetes/ssl/ca-key.pem 
--service-account-signing-key-file=/opt/kubernetes/ssl/ca-key.pem 
--service-account-issuer=https://kubernetes.default.svc.cluster.local 
--etcd-cafile=/opt/etcd/ssl/ca.pem 
--etcd-certfile=/opt/etcd/ssl/etcd.pem 
--etcd-keyfile=/opt/etcd/ssl/etcd-key.pem 
--etcd-servers=https://192.168.6.1:2379,https://192.168.6.2:2379,https://192.168.6.3:2379 
--enable-swagger-ui=true 
--allow-privileged=true 
--apiserver-count=3 
--audit-log-maxage=30 
--audit-log-maxbackup=3 
--audit-log-maxsize=100 
--audit-log-path=/var/log/kubernetes/kube-apiserver-audit.log 
--event-ttl=1h 
--alsologtostderr=true 
--logtostderr=false 
--log-dir=/var/log/kubernetes 
--v=4"
 
创建服务启动文件kube-apiserver.service 
[Unit]
Description=Kubernetes API Server
Documentation=https://github.com/kubernetes/kubernetes
After=etcd.service
Wants=etcd.service

[Service]
EnvironmentFile=-/opt/kubernetes/conf/kube-apiserver.conf
ExecStart=/opt/kubernetes/bin/kube-apiserver $KUBE_APISERVER_OPTS
Restart=on-failure
RestartSec=5
Type=notify
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target
 
分发文件 
#!/bin/bash

NODE_IPS=("192.168.6.1" "192.168.6.2" "192.168.6.3")

SSL_PATH='/root/k8s/ssl'
BIN_PATH='/root/k8s/k8s/kubernetes/server/bin'
BIN_FILE='kube-apiserver'

#替换模板文件中的变量，为各节点创建 systemd unit 文件
for (( i=0; i < 3; i++ ));do
    echo ">>> ${NODE_IPS[i]}"
    sed -e "s/local_ip/${NODE_IPS[i]}/g" /root/k8s/k8s/config/kube-apiserver.conf > /root/k8s/k8s/config/kube-apiserver-${NODE_IPS[i]}.conf
    scp /root/k8s/k8s/config/kube-apiserver-${NODE_IPS[i]}.conf root@${NODE_IPS[i]}:/opt/kubernetes/conf/kube-apiserver.conf
    scp /root/k8s/k8s/config/token.csv root@${NODE_IPS[i]}:/opt/kubernetes/conf/token.csv
    scp /root/k8s/k8s/config/kube-apiserver.service root@${NODE_IPS[i]}:/etc/systemd/system/kube-apiserver.service
    scp /root/k8s/k8s/config/audit-policy.yaml root@${NODE_IPS[i]}:/opt/kubernetes/conf/audit-policy.yaml

    scp ${SSL_PATH}/ca* root@${NODE_IPS[i]}:/opt/kubernetes/ssl
    scp ${SSL_PATH}/kube-apiserver* root@${NODE_IPS[i]}:/opt/kubernetes/ssl
    scp ${BIN_PATH}/${BIN_FILE} root@${NODE_IPS[i]}:/opt/kubernetes/bin
done
 
启动服务 
systemctl daemon-reload
systemctl enable kube-apiserver
systemctl start kube-apiserver
 
部署kubectl 
创建csr请求文件admin-csr.json 
{
	"CN": "admin",
	"hosts": [],
	"key": {
		"algo": "rsa",
		"size": 2048
	},
	"names": [
		{
			"C": "CN",
			"ST": "BeiJing",
			"L": "BeiJing",
			"O": "system:masters",        
			"OU": "system"
		}
	]
}
 
生成证书 
cfssl gencert 
-ca=/root/k8s/ssl/ca.pem -ca-key=/root/k8s/ssl/ca-key.pem -config=/root/k8s/ssl/ca-config.json 
-profile=kubernetes /root/k8s/ssl/admin-csr.json | cfssljson -bare /root/k8s/ssl/admin
 
分发证书 
将生成的admin证书分发到所有需要安装kbuectl节点中： 
#!/bin/bash

NODE_IPS=("192.168.6.1" "192.168.6.2" "192.168.6.3")

SSL_PATH='/root/k8s/ssl'

#替换模板文件中的变量，为各节点创建 systemd unit 文件
for (( i=0; i < 3; i++ ));do
    echo ">>> ${NODE_IPS[i]}"
    scp ${SSL_PATH}/admin* root@${NODE_IPS[i]}:/opt/kubernetes/ssl
    scp /root/k8s/k8s/kubernetes/server/bin/kubectl root@${NODE_IPS[i]}:/opt/kubernetes/bin
done
 
创建kubeconfig配置文件 
kubectl config set-cluster kubernetes 
--certificate-authority=/opt/kubernetes/ssl/ca.pem 
--embed-certs=true 
--server=https://192.168.6.253:16443 
--kubeconfig=/root/k8s/k8s/config/kube.config

kubectl config set-credentials admin 
--client-certificate=/opt/kubernetes/ssl/admin.pem 
--client-key=/opt/kubernetes/ssl/admin-key.pem 
--embed-certs=true 
--kubeconfig=/root/k8s/k8s/config/kube.config

kubectl config set-context kubernetes --cluster=kubernetes --user=admin --kubeconfig=/root/k8s/k8s/config/kube.config

kubectl config use-context kubernetes --kubeconfig=/root/k8s/k8s/config/kube.config
 
分发kubeconfig配置文件 
#!/bin/bash

NODE_IPS=("192.168.6.1" "192.168.6.2" "192.168.6.3")

for node_ip in ${NODE_IPS[@]};do
    echo ">>> ${node_ip}"
    ssh root@${node_ip} "mkdir -p ~/.kube"
    scp /root/k8s/k8s/config/kube.config root@${node_ip}:~/.kube/config
done
 
授权kubernetes证书访问kubelet api权限 
kubectl create clusterrolebinding kube-apiserver:kubelet-apis --clusterrole=system:kubelet-api-admin --user kubernetes
 
查看集群组件状态 
上面步骤完成后，kubectl就可以与kube-apiserver通信了: 
kubectl cluster-info
kubectl get componentstatuses
kubectl get all --all-namespaces
 
配置kubectl子命令补全 
yum install -y bash-completion
source /usr/share/bash-completion/bash_completion
source <(kubectl completion bash)
kubectl completion bash > ~/.kube/completion.bash.inc
source '/root/.kube/completion.bash.inc'
source $HOME/.bash_profile
 
部署kube-controller-manager 
创建csr请求文件kube-controller-manager-csr.json 
{
	"CN": "system:kube-controller-manager",
	"key": {
		"algo": "rsa",
		"size": 2048
	},
	"hosts": [
		"127.0.0.1",
		"192.168.6.1",
		"192.168.6.2",
		"192.168.6.3",
		"192.168.6.4",
		"192.168.6.5",
        "localhost"
	],
	"names": [
		{
			"C": "CN",
			"ST": "BeiJing",
			"L": "BeiJing",
			"O": "system:kube-controller-manager",
			"OU": "system"
		}
	]
}
 
生成证书 
cd /root/k8s/ssl

cfssl gencert 
-ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json 
-profile=kubernetes kube-controller-manager-csr.json | cfssljson -bare kube-controller-manager
 
分发证书 
#!/bin/bash

NODE_IPS=("192.168.6.1" "192.168.6.2" "192.168.6.3")

for node_ip in ${NODE_IPS[@]};do
    echo ">>> ${node_ip}"
	#分发证书
	scp /root/k8s/ssl/kube-controller-manager* root@${node_ip}:/opt/kubernetes/ssl
done
 
创建kube-controller-manager的kubeconfig 
#设置集群参数
kubectl config set-cluster kubernetes 
--certificate-authority=/opt/kubernetes/ssl/ca.pem 
--embed-certs=true 
--server=https://192.168.6.253:16443 
--kubeconfig=/root/k8s/k8s/config/kube-controller-manager.kubeconfig

#设置客户端认证参数
kubectl config set-credentials system:kube-controller-manager 
--client-certificate=/opt/kubernetes/ssl/kube-controller-manager.pem 
--client-key=/opt/kubernetes/ssl/kube-controller-manager-key.pem 
--embed-certs=true 
--kubeconfig=/root/k8s/k8s/config/kube-controller-manager.kubeconfig

#设置上下文参数
kubectl config set-context system:kube-controller-manager 
--cluster=kubernetes 
--user=system:kube-controller-manager 
--kubeconfig=/root/k8s/k8s/config/kube-controller-manager.kubeconfig

#设置默认上下文
kubectl config use-context system:kube-controller-manager 
--kubeconfig=/root/k8s/k8s/config/kube-controller-manager.kubeconfig
 
创建配置文件kube-controller-manager.conf 
KUBE_CONTROLLER_MANAGER_OPTS="--port=0 
--secure-port=10257 
--bind-address=127.0.0.1 
--kubeconfig=/opt/kubernetes/conf/kube-controller-manager.kubeconfig 
--service-cluster-ip-range=10.254.0.0/16 
--cluster-name=kubernetes 
--cluster-signing-cert-file=/opt/kubernetes/ssl/ca.pem 
--cluster-signing-key-file=/opt/kubernetes/ssl/ca-key.pem 
--allocate-node-cidrs=true 
--cluster-cidr=10.0.0.0/16 
--experimental-cluster-signing-duration=87600h 
--root-ca-file=/opt/kubernetes/ssl/ca.pem 
--service-account-private-key-file=/opt/kubernetes/ssl/ca-key.pem 
--leader-elect=true 
--feature-gates=RotateKubeletServerCertificate=true 
--controllers=*,bootstrapsigner,tokencleaner 
--horizontal-pod-autoscaler-sync-period=10s 
--tls-cert-file=/opt/kubernetes/ssl/kube-controller-manager.pem 
--tls-private-key-file=/opt/kubernetes/ssl/kube-controller-manager-key.pem 
--use-service-account-credentials=true 
--alsologtostderr=true 
--logtostderr=false 
--log-dir=/var/log/kubernetes 
--v=2"
 
 
 –experimental-cluster-signing-duration：指定证书过期时间； 
 –feature-gates=RotateKubeletServerCertificate：开启自动续期证书； 
 
创建启动文件kube-controller-manager.service 
[Unit]
Description=Kubernetes Controller Manager
Documentation=https://github.com/kubernetes/kubernetes

[Service]
EnvironmentFile=-/opt/kubernetes/conf/kube-controller-manager.conf
ExecStart=/opt/kubernetes/bin/kube-controller-manager $KUBE_CONTROLLER_MANAGER_OPTS
Restart=on-failure
RestartSec=5

[Install]
WantedBy=multi-user.target
 
分发文件 
#!/bin/bash

NODE_IPS=("192.168.6.1" "192.168.6.2" "192.168.6.3")

for node_ip in ${NODE_IPS[@]};do
    echo ">>> ${node_ip}"
	#分发kubeconfig文件
	scp /root/k8s/k8s/config/kube-controller-manager.kubeconfig root@${node_ip}:/opt/kubernetes/conf
	#分发conf文件
	scp /root/k8s/k8s/config/kube-controller-manager.conf root@${node_ip}:/opt/kubernetes/conf
	#分发service文件
	scp /root/k8s/k8s/config/kube-controller-manager.service root@${node_ip}:/usr/lib/systemd/system
	#分发二进制文件
	scp /root/k8s/k8s/kubernetes/server/bin/kube-controller-manager root@${node_ip}:/opt/kubernetes/bin
done
 
启动服务 
systemctl daemon-reload
systemctl enable kube-controller-manager
systemctl start kube-controller-manager
systemctl status kube-controller-manager
 
部署kube-scheduler 
创建csr请求文件kube-scheduler-csr.json 
{
	"CN": "system:kube-scheduler",
	"hosts": [
		"127.0.0.1",
		"192.168.6.1",
		"192.168.6.2",
		"192.168.6.3",
		"192.168.6.4",
		"192.168.6.5",
		"localhost"
	],
	"key": {
		"algo": "rsa",
		"size": 2048
	},
	"names": [
		{
			"C": "CN",
			"ST": "BeiJing",
			"L": "BeiJing",
			"O": "system:kube-scheduler",
			"OU": "system"
		}
	]
}
 
生成证书 
cd /root/k8s/ssl

cfssl gencert 
-ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json 
-profile=kubernetes kube-scheduler-csr.json | cfssljson -bare kube-scheduler

ls kube-scheduler*.pem
 
创建kube-scheduler的kubeconfig 
#设置集群参数
kubectl config set-cluster kubernetes 
--certificate-authority=/root/k8s/ssl/ca.pem 
--embed-certs=true 
--server=https://192.168.6.253:16443 
--kubeconfig=/root/k8s/k8s/config/kube-scheduler.kubeconfig

#设置客户端认证参数
kubectl config set-credentials system:kube-scheduler 
--client-certificate=/root/k8s/ssl/kube-scheduler.pem 
--client-key=/root/k8s/ssl/kube-scheduler-key.pem 
--embed-certs=true 
--kubeconfig=/root/k8s/k8s/config/kube-scheduler.kubeconfig

#设置上下文参数
kubectl config set-context system:kube-scheduler 
--cluster=kubernetes 
--user=system:kube-scheduler 
--kubeconfig=/root/k8s/k8s/config/kube-scheduler.kubeconfig

#设置默认上下文
kubectl config use-context system:kube-scheduler 
--kubeconfig=/root/k8s/k8s/config/kube-scheduler.kubeconfig
 
创建配置文件kube-scheduler.conf 
KUBE_SCHEDULER_OPTS="--address=127.0.0.1 
--kubeconfig=/opt/kubernetes/conf/kube-scheduler.kubeconfig 
--leader-elect=true 
--alsologtostderr=true 
--logtostderr=false 
--log-dir=/var/log/kubernetes 
--v=2"
 
创建服务启动文件kube-scheduler.service 
[Unit]
Description=Kubernetes Scheduler
Documentation=https://github.com/kubernetes/kubernetes

[Service]
EnvironmentFile=-/opt/kubernetes/conf/kube-scheduler.conf
ExecStart=/opt/kubernetes/bin/kube-scheduler $KUBE_SCHEDULER_OPTS
Restart=on-failure
RestartSec=5

[Install]
WantedBy=multi-user.target
 
分发文件 
#!/bin/bash

NODE_IPS=("192.168.6.1" "192.168.6.2" "192.168.6.3")

for node_ip in ${NODE_IPS[@]};do
    echo ">>> ${node_ip}"
    #分发证书
	scp /root/k8s/ssl/kube-scheduler* root@${node_ip}:/opt/kubernetes/ssl
	#分发kubeconfig文件
	scp /root/k8s/k8s/config/kube-scheduler.kubeconfig root@${node_ip}:/opt/kubernetes/conf
	#分发conf文件
	scp /root/k8s/k8s/config/kube-scheduler.conf root@${node_ip}:/opt/kubernetes/conf
	#分发service文件
	scp /root/k8s/k8s/config/kube-scheduler.service root@${node_ip}:/usr/lib/systemd/system
	#分发二进制文件
	scp /root/k8s/k8s/kubernetes/server/bin/kube-scheduler root@${node_ip}:/opt/kubernetes/bin
done
 
启动服务 
systemctl daemon-reload
systemctl enable kube-scheduler
systemctl start kube-scheduler
systemctl status kube-scheduler
 
六、部署node节点 
部署docker 
下载docker rpm包 
下载docker-ce：https://download.docker.com/linux/centos/7/x86_64/stable/Packages/docker-ce-20.10.8-3.el7.x86_64.rpm 
下载containerd.io：https://download.docker.com/linux/centos/7/x86_64/stable/Packages/containerd.io-1.4.9-3.1.el7.x86_64.rpm 
下载docker-ce-cli：https://download.docker.com/linux/centos/7/x86_64/stable/Packages/docker-ce-cli-20.10.8-3.el7.x86_64.rpm 
下载docker-ce-rootless-extras：https://download.docker.com/linux/centos/7/x86_64/stable/Packages/docker-ce-rootless-extras-20.10.8-3.el7.x86_64.rpm 
下载docker-scan-plugin：https://download.docker.com/linux/centos/7/x86_64/stable/Packages/docker-scan-plugin-0.8.0-3.el7.x86_64.rpm 
/root/k8s/docker

wget https://download.docker.com/linux/centos/7/x86_64/stable/Packages/docker-ce-20.10.8-3.el7.x86_64.rpm
wget https://download.docker.com/linux/centos/7/x86_64/stable/Packages/containerd.io-1.4.9-3.1.el7.x86_64.rpm
wget https://download.docker.com/linux/centos/7/x86_64/stable/Packages/docker-ce-cli-20.10.8-3.el7.x86_64.rpm
wget https://download.docker.com/linux/centos/7/x86_64/stable/Packages/docker-ce-rootless-extras-20.10.8-3.el7.x86_64.rpm
wget https://download.docker.com/linux/centos/7/x86_64/stable/Packages/docker-scan-plugin-0.8.0-3.el7.x86_64.rpm
 
分发docker安装包 
scp -r /root/k8s/docker root@k8snode01:/tmp/docker
scp -r /root/k8s/docker root@k8snode02:/tmp/docker
scp -r /root/k8s/docker root@k8snode03:/tmp/docker
 
卸载旧版本docker 
yum remove docker 
    docker-client 
    docker-client-latest 
    docker-common 
    docker-latest 
    docker-latest-logrotate 
    docker-logrotate 
    docker-engine
 
 
 在所有node节点上执行。 
 
安装docker 
yum install -y /tmp/docker/*
 
 
 在所有node节点上执行。 
 
修改docker源和驱动 
mkdir /etc/docker

cat > /etc/docker/daemon.json << EOF
{
    "exec-opts": ["native.cgroupdriver=systemd"],
    "registry-mirrors": [
        "https://1nj0zren.mirror.aliyuncs.com",
        "https://kfwkfulq.mirror.aliyuncs.com",
        "https://2lqq34jg.mirror.aliyuncs.com",
        "https://pee6w651.mirror.aliyuncs.com",
        "http://hub-mirror.c.163.com",
        "https://docker.mirrors.ustc.edu.cn",
        "http://f1361db2.m.daocloud.io",
        "https://registry.docker-cn.com"
    ]
}
EOF
 
 
 在所有node节点执行此命令。 
 
启动docker服务 
systemctl daemon-reload
systemctl enable docker
systemctl start docker
systemctl status docker
 
部署kubelet 
创建kubelet-bootstrap.kubeconfig 
#获取token，token在安装apiserver是生成
BOOTSTRAP_TOKEN=$(awk -F "," '{print $1}' /opt/kubernetes/conf/token.csv)

#设置集群参数
kubectl config set-cluster kubernetes 
--certificate-authority=/opt/kubernetes/ssl/ca.pem 
--embed-certs=true 
--server=https://192.168.6.253:16443 
--kubeconfig=/root/k8s/k8s/config/kubelet-bootstrap.kubeconfig

#设置客户端认证参数
kubectl config set-credentials kubelet-bootstrap 
--token=${BOOTSTRAP_TOKEN} 
--kubeconfig=/root/k8s/k8s/config/kubelet-bootstrap.kubeconfig

#设置上下文参数
kubectl config set-context default 
--cluster=kubernetes 
--user=kubelet-bootstrap 
--kubeconfig=/root/k8s/k8s/config/kubelet-bootstrap.kubeconfig

#设置默认上下文
kubectl config use-context default 
--kubeconfig=/root/k8s/k8s/config/kubelet-bootstrap.kubeconfig
 
角色绑定 
kubelet 启动时向 kube-apiserver 发送 TLS bootstrapping 请求，需要先将 bootstrap token 文件中的 kubelet-bootstrap 用户赋予 system:node-bootstrapper cluster 角色(role)， 然后 kubelet 才能有权限创建认证请求(certificate signing requests)： 
kubectl create clusterrolebinding kubelet-bootstrap --clusterrole=system:node-bootstrapper --user=kubelet-bootstrap
 
 
 –user=kubelet-bootstrap 是部署kube-apiserver时创建bootstrap-token.csv文件中指定的用户，同时也需要写入bootstrap.kubeconfig 文件 
 
创建配置文件kubelet.json 
{
	"kind": "KubeletConfiguration",
	"apiVersion": "kubelet.config.k8s.io/v1beta1",
	"authentication": {
		"x509": {
			"clientCAFile": "/opt/kubernetes/ssl/ca.pem"
		},
		"webhook": {
			"enabled": true,
			"cacheTTL": "2m0s"
		},
		"anonymous": {
			"enabled": false
		}
	},
	"authorization": {
		"mode": "Webhook",
		"webhook": {
			"cacheAuthorizedTTL": "5m0s",
			"cacheUnauthorizedTTL": "30s"
		}
	},
	"address": "local_ip",
	"port": 10250,
	"readOnlyPort": 10255,
	"cgroupDriver": "systemd",
	"hairpinMode": "promiscuous-bridge",
	"serializeImagePulls": false,
	"featureGates": {
		"RotateKubeletServerCertificate": true
	},
	"clusterDomain": "cluster.local.",
	"clusterDNS": ["10.254.0.2"]
}
 
创建启动文件kubelet.service 
[Unit]
Description=Kubernetes Kubelet
Documentation=https://github.com/kubernetes/kubernetes
After=docker.service
Requires=docker.service

[Service]
WorkingDirectory=/var/lib/kubelet
ExecStart=/opt/kubernetes/bin/kubelet 
	--bootstrap-kubeconfig=/opt/kubernetes/conf/kubelet-bootstrap.kubeconfig 
	--cert-dir=/opt/kubernetes/ssl 
	--kubeconfig=/opt/kubernetes/conf/kubelet.kubeconfig 
	--config=/opt/kubernetes/conf/kubelet.json 
	--network-plugin=cni 
	--pod-infra-container-image=k8s.gcr.io/pause:3.2 
	--alsologtostderr=true 
	--logtostderr=false 
	--log-dir=/var/log/kubernetes 
	--v=2
Restart=on-failure
RestartSec=5

[Install]
WantedBy=multi-user.target
 
分发文件 
#!/bin/bash

NODE_IPS=("192.168.6.1" "192.168.6.2" "192.168.6.3")
SRC_K8S_CONFIG='/root/k8s/k8s/config'
DEST_K8S_CONFIG='/opt/kubernetes/conf'

SRC_K8S_BIN='/root/k8s/k8s/kubernetes/server/bin'
DEST_K8S_BIN='/opt/kubernetes/bin'

for (( i=0; i < 3; i++ ));do
    echo ">>> ${NODE_IPS[i]}"
    
    #分发kubelet.json文件
    sed "s/local_ip/${NODE_IPS[i]}/g" ${LOCAL_K8S_CONFIG}/kubelet.json > ${SRC_K8S_CONFIG}/kubelet-${NODE_IPS[i]}.json
    scp ${SRC_K8S_CONFIG}/kubelet-${NODE_IPS[i]}.json root@${NODE_IPS[i]}:${DEST_K8S_CONFIG}/kubelet.json
    rm -f ${SRC_K8S_CONFIG}/kubelet-${NODE_IPS[i]}.json
    
    #分发kubelet-bootstrap.kubeconfig文件
    scp ${SRC_K8S_CONFIG}/kubelet-bootstrap.kubeconfig root@${NODE_IPS[i]}:${DEST_K8S_CONFIG}
    
    #分发kubelet.service文件
    scp ${SRC_K8S_CONFIG}/kubelet.service root@${NODE_IPS[i]}:/usr/lib/systemd/system
    ssh root@${NODE_IPS[i]} "mkdir /var/lib/kubelet"
    
    #分发二进制文件
    scp ${SRC_K8S_BIN}/kubelet root@${NODE_IPS[i]}:${DEST_K8S_BIN} 
done
 
启动服务 
systemctl daemon-reload
systemctl enable kubelet
systemctl start kubelet
systemctl status kubelet
 
查看未授权的csr请求 
kubectl get csr
 
执行以上命令后可以看到三个csr请求（处于”Pending”状态）： 
[外链图片转存失败,源站可能有防盗链机制,建议将图片保存下来直接上传(img-33XBlYpW-1654785072068)(C:UsersxuwqAppDataRoamingTyporatypora-user-imagesimage-20210911194812802.png)] 
授权csr请求 
kubelet 首次启动向 kube-apiserver 发送证书签名请求，必须由 kubernetes 系统允许通过后，才会将该 node 加入到集群。执行以下命令可授权csr请求： 
kubectl certificate approve node-csr-6ExtaLX1zmSeMJBX4NcB7-mbx6FcWnm5R4326q1G-Jg
 
命令执行过程及结果： 
[外链图片转存失败,源站可能有防盗链机制,建议将图片保存下来直接上传(img-mWtTTwaN-1654785072090)(C:UsersxuwqAppDataRoamingTyporatypora-user-imagesimage-20210911195310533.png)] 
查看node节点状态 
[root@k8snode01 scripts]# kubectl get nodes
NAME        STATUS     ROLES    AGE     VERSION
k8snode01   NotReady      2m24s   v1.22.1
k8snode02   NotReady      2m38s   v1.22.1
k8snode03   NotReady      2m13s   v1.22.1
 
 
 由于还没有安装网络，所以node节点还处于NotReady状态。 
 
部署kube-proxy 
kube-proxy的作用主要是负责service的实现，具体来说，就是实现了内部从pod到service和外部的从node port向service的访问。 
新版本目前 kube-proxy 组件全部采用 ipvs 方式负载，所以为了 kube-proxy 能正常工作需要预先处理一下 ipvs 配置以及相关依赖(每台 node 都要处理)。 
配置ipvs 
 安装ipvs所需工具
 yum -y install ipvsadm ipset conntrack
 
 开启ipvs支持
 #手动加载
modprobe -- ip_vs
modprobe -- ip_vs_rr
modprobe -- ip_vs_wrr
modprobe -- ip_vs_sh
modprobe -- nf_conntrack_ipv4
lsmod | grep ip_vs
lsmod | grep nf_conntrack_ipv4

#开机自动加载
cat > /etc/sysconfig/modules/ipvs.modules <  
创建csr请求文件kube-proxy-csr.json 
{
	"CN": "system:kube-proxy",
	"hosts": [],
	"key": {
		"algo": "rsa",
		"size": 2048
	},
	"names": [
		{
			"C": "CN",
			"ST": "BeiJing",
			"L": "BeiJing",
			"O": "system:kube-proxy",
			"OU": "system"
		}
	]
}
 
生成证书 
cd /root/k8s/ssl

cfssl gencert 
-ca=ca.pem -ca-key=ca-key.pem 
-config=ca-config.json 
-profile=kubernetes kube-proxy-csr.json | cfssljson -bare kube-proxy

ls kube-proxy*
 
创建kubeconfig文件 
cd /root/k8s/ssl

kubectl config set-cluster kubernetes 
--certificate-authority=ca.pem 
--embed-certs=true 
--server=https://192.168.6.253:16443 
--kubeconfig=/root/k8s/k8s/config/kube-proxy.kubeconfig

kubectl config set-credentials kube-proxy 
--client-certificate=kube-proxy.pem 
--client-key=kube-proxy-key.pem 
--embed-certs=true 
--kubeconfig=/root/k8s/k8s/config/kube-proxy.kubeconfig

kubectl config set-context default 
--cluster=kubernetes 
--user=kube-proxy 
--kubeconfig=/root/k8s/k8s/config/kube-proxy.kubeconfig

kubectl config use-context default 
--kubeconfig=/root/k8s/k8s/config/kube-proxy.kubeconfig
 
创建kube-proxy配置文件kube-proxy.yaml 
apiVersion: kubeproxy.config.k8s.io/v1alpha1
bindAddress: local_ip
metricsBindAddress: local_ip:10249
healthzBindAddress: local_ip:10256
clientConnection:
  kubeconfig: /opt/kubernetes/conf/kube-proxy.kubeconfig
clusterCIDR: 10.0.0.0/16
kind: KubeProxyConfiguration
mode: "ipvs"
kubeProxyIPTablesConfiguration:
  masqueradeAll: false
 
创建服务启动文件kube-proxy.service 
[Unit]
Description=Kubernetes Kube-Proxy Server
Documentation=https://github.com/kubernetes/kubernetes
After=network.target

[Service]
ExecStart=/opt/kubernetes/bin/kube-proxy 
  --config=/opt/kubernetes/conf/kube-proxy.yaml 
  --alsologtostderr=true 
  --logtostderr=false 
  --log-dir=/var/log/kubernetes 
  --v=2
Restart=on-failure
RestartSec=5
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target
 
分发文件 
#!/bin/bash

NODE_IPS=("192.168.6.1" "192.168.6.2" "192.168.6.3")

SRC_K8S_CONFIG='/root/k8s/k8s/config'
DEST_K8S_CONFIG='/opt/kubernetes/conf'

for node_ip in ${NODE_IPS[@]};do
    echo ">>> ${node_ip}"
    #分发证书
	scp /root/k8s/ssl/kube-proxy* root@${node_ip}:/opt/kubernetes/ssl
	#分发kubeconfig文件
	scp ${SRC_K8S_CONFIG}/kube-proxy.kubeconfig root@${node_ip}:${DEST_K8S_CONFIG}
	#分发conf文件
	sed "s/local_ip/${node_ip}/g" ${SRC_K8S_CONFIG}/kube-proxy.yaml > ${SRC_K8S_CONFIG}/kube-proxy-${node_ip}.yaml
    scp ${SRC_K8S_CONFIG}/kube-proxy-${node_ip}.yaml root@${node_ip}:${DEST_K8S_CONFIG}/kube-proxy.yaml
    rm -f ${SRC_K8S_CONFIG}/kube-proxy-${node_ip}.yaml
	#分发service文件
	scp ${SRC_K8S_CONFIG}/kube-proxy.service root@${node_ip}:/usr/lib/systemd/system
	#分发二进制文件
	scp /root/k8s/k8s/kubernetes/server/bin/kube-proxy root@${node_ip}:/opt/kubernetes/bin
done
 
启动服务 
systemctl daemon-reload
systemctl enable kube-proxy
systemctl restart kube-proxy
systemctl status kube-proxy
 
查看ipvs路由规则 
[root@k8snode01 scripts]# ipvsadm -L -n
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
  -> RemoteAddress:Port           Forward Weight ActiveConn InActConn
TCP  10.254.0.1:443 rr
  -> 192.168.6.1:6443             Masq    1      0          0         
  -> 192.168.6.2:6443             Masq    1      0          0         
  -> 192.168.6.3:6443             Masq    1      0          0
 
 
 检查LVS状态，可以看到已经创建了一个LVS集群，将来自10.254.0.1:443的请求转到三台master的6443端口，而6443就是api-server的端口。 
 
配置网络组件 
下载calico 
cd /opt/kubernetes/conf
curl https://docs.projectcalico.org/manifests/calico-etcd.yaml -o calico.yaml
 
配置etcd 
 生成etcd证书base64编码
 使用以下命令对etcd的证书etcd-key.pem、etcd.pem、ca.pem进行base64编码：
 cat /etc/kubernetes/ssl/etcd-key.pem | base64 | tr -d 'n'
 
 配置etcd证书base64编码
 # vim calico-etcd.yaml
...
apiVersion: v1
kind: Secret
type: Opaque
metadata:
  name: calico-etcd-secrets
  namespace: kube-system
data:
  # Populate the following with etcd TLS configuration if desired, but leave blank if
  # not using TLS for etcd.
  # The keys below should be uncommented and the values populated with the base64
  # encoded contents of each file that would be associated with the TLS data.
  # Example command for encoding a file contents: cat  | base64 -w 0
  etcd-key: 填写上面的加密字符串
  etcd-cert: 填写上面的加密字符串
  etcd-ca: 填写上面的加密字符串
...
kind: ConfigMap
apiVersion: v1
metadata:
  name: calico-config
  namespace: kube-system
data:
  # Configure this with the location of your etcd cluster.
  etcd_endpoints: "https://192.168.1.2:2379"
  # If you're using TLS enabled etcd uncomment the following.
  # You must also populate the Secret below with these files.
  etcd_ca: "/calico-secrets/etcd-ca"       #这三个值不需要修改
  etcd_cert: "/calico-secrets/etcd-cert"   #这三个值不需要修改
  etcd_key: "/calico-secrets/etcd-key"     #这三个值不需要修改
 
 创建Calico相关资源
 #创建Calico相关资源
kubectl apply -f /opt/kubernetes/conf/calico.yaml

#删除Calico相关资源
kubectl delete -f /opt/kubernetes/conf/calico.yaml
  
查看网络状态 
[root@k8snode02 ~]# kubectl get pod -n kube-system -o wide
NAME                                       READY   STATUS    RESTARTS      AGE    IP            NODE        NOMINATED NODE   READINESS GATES
calico-kube-controllers-59db5cf8fd-j6dlz   1/1     Running   0             128m   192.168.6.1   k8snode01              
calico-node-brdnp                          1/1     Running   0             128m   192.168.6.3   k8snode03              
calico-node-d74n5                          1/1     Running   1 (28m ago)   128m   192.168.6.1   k8snode01              
calico-node-v7bnm                          1/1     Running   0             128m   192.168.6.2   k8snode02              
 
查看node是否为就绪状态 
[root@k8snode02 ~]# kubectl get nodes
NAME        STATUS   ROLES    AGE   VERSION
k8snode01   Ready       18h   v1.22.1
k8snode02   Ready       18h   v1.22.1
k8snode03   Ready       18h   v1.22.1
 
遇到的问题 
问题一： 
描述： 
 failed pulling image "k8s.gcr.io/pause:3.2" 
通过命令kubectl describe pods -n kube-system calico-kube-controllers-59db5cf8fd-j6dlz获取到如下错误： 
 
解决方法： 
手动去docker.io仓库搜索pause:3.2镜像进行下载，并通过docker tag命令将镜像标签修改为k8s.gcr.io/pause:3.2。 
参考资料： 
(5条消息) Kubernetes：如何解决从k8s.gcr.io拉取镜像失败问题_Bob Liu的程序人生-CSDN博客 
问题二： 
描述： 
0/3 nodes are available: 3 node(s) had taint {node.kubernetes.io/not-ready: }, that the pod didn't tolerate. 
解决方法： 
kubectl taint nodes --all node.kubernetes.io/not-ready=:NoSchedule-
 
参考资料： 
污点和容忍度 | Kubernetes 
部署coredns 
下载coredns 
cd /opt/coredns
wget https://raw.githubusercontent.com/coredns/deployment/master/kubernetes/coredns.yaml.sed
mv coredns.yaml.sed coredns.yaml
 
修改配置文件 
修改一： 
#修改前
forward . UPSTREAMNAMESERVER {
	max_concurrent 1000
}
#修改后
forward . /etc/resolv.conf {
	max_concurrent 1000
}
 
修改二： 
#修改前
kubernetes CLUSTER_DOMAIN REVERSE_CIDRS {
	fallthrough in-addr.arpa ip6.arpa
}
#修改后
kubernetes cluster.local in-addr.arpa ip6.arpa {
	fallthrough in-addr.arpa ip6.arpa
}
 
修改三： 
#修改前
clusterIP: CLUSTER_DNS_IP
#修改后，10.254.0.2（kubelet配置文件中的clusterDNS）
clusterIP: 10.254.0.2
 
创建对应资源 
kubectl apply -f /opt/coredns/coredns.yaml

kubectl delete -f /opt/coredns/coredns.yaml
 
查看资源创建 
[root@k8snode01 coredns]# kubectl get all -n kube-system                          
NAME                                           READY   STATUS    RESTARTS      AGE
pod/calico-kube-controllers-59db5cf8fd-j6dlz   1/1     Running   1 (15m ago)   3h
pod/calico-node-brdnp                          1/1     Running   0             3h
pod/calico-node-d74n5                          1/1     Running   2 (15m ago)   3h
pod/calico-node-v7bnm                          1/1     Running   0             3h
pod/coredns-675db8b7cc-5kbxj                   1/1     Running   0             8s

NAME               TYPE        CLUSTER-IP   EXTERNAL-IP   PORT(S)                  AGE
service/kube-dns   ClusterIP   10.254.0.2           53/UDP,53/TCP,9153/TCP   8s

NAME                         DESIRED   CURRENT   READY   UP-TO-DATE   AVAILABLE   NODE SELECTOR            AGE
daemonset.apps/calico-node   3         3         3       3            3           kubernetes.io/os=linux   3h

NAME                                      READY   UP-TO-DATE   AVAILABLE   AGE
deployment.apps/calico-kube-controllers   1/1     1            1           3h
deployment.apps/coredns                   1/1     1            1           9s

NAME                                                 DESIRED   CURRENT   READY   AGE
replicaset.apps/calico-kube-controllers-59db5cf8fd   1         1         1       3h
replicaset.apps/coredns-675db8b7cc                   1         1         1       9s
 
查看日志 
kubectl logs -n kube-system pod/coredns-675db8b7cc-5kbxj
 
验证 
 部署nginx
 新建文件nginx.yaml，并将以下内容添加进文件中：
 ---
apiVersion: v1
kind: ReplicationController
metadata:
  name: nginx-controller
spec:
  replicas: 2
  selector:
    name: nginx
  template:
    metadata:
      labels:
        name: nginx
    spec:
      containers:
        - name: nginx
          image: nginx:1.19.6
          ports:
            - containerPort: 80
---
apiVersion: v1
kind: Service
metadata:
  name: nginx-service-nodeport
spec:
  ports:
    - port: 80
      targetPort: 80
      nodePort: 30001
      protocol: TCP
  type: NodePort
  selector:
    name: nginx
 
 创建nginx资源
 kubectl apply -f ./nginx.yaml
 
 查看资源
 [root@k8snode01 ~]# kubectl get svc
NAME                     TYPE        CLUSTER-IP      EXTERNAL-IP   PORT(S)        AGE
kubernetes               ClusterIP   10.254.0.1              443/TCP        2d16h
nginx-service-nodeport   NodePort    10.254.248.81           80:30001/TCP   10s
[root@k8snode01 ~]# kubectl get pods
NAME                     READY   STATUS              RESTARTS   AGE
nginx-controller-8t689   0/1     ContainerCreating   0          22s
nginx-controller-mnmzf   0/1     ContainerCreating   0          22s
 
 进入nginx-controller-8t689
 kubectl exec -it nginx-controller-8t689 -- /bin/bash
 
 ping域名
 ping -c 5 nginx-service-nodeport
 如果成功，则表示dns部署成功。
 
 使用浏览器打开nginx页面
 在浏览器中输入网址http://192.168.6.1:30001即可打开nginx首页。
  
参考资料 
证书相关资料： 
https://segmentfault.com/a/1190000038276488 
集群部署资料： 
kubernetes高可用集群安装（二进制安装、v1.20.2版）【附源码】_Rainbowhhy_51CTO博客 
K8S 从入门到放弃系列文章目录（Kubernetes 1.14） - 小哥boy - 博客园 (cnblogs.com) 
K8S/18_Kubernetes搭建高可用集群 · 陌溪/LearningNotes - 码云 - 开源中国 (gitee.com) 
其他资料： 
(5条消息) Kubernetes TLS bootstrapping 那点事_paopaohll的博客-CSDN博客 
Configuration APIs | Kubernetes 
calico网络： 
Install Calico networking and network policy for on-premises deployments (projectcalico.org) 
Install Calico networking and network policy for on-premises deployments (projectcalico.org) 
在现有集群中部署calico踩坑记录 - shininglight - 博客园 (cnblogs.com) 
安装 Calico 网络和网络策略，以便进行现场部署 (projectcalico.org) 
Configure calicoctl to connect to an etcd datastore (projectcalico.org)

二进制部署高可用k8s集群

Linux相关栏目本月热门文章