esp32cam socket图传至服务器实现外网直播

 esp32cam烧录代码

#include "WiFi.h"
#include "esp_camera.h"
#include //需要安装库：https://www.arduinolibraries.info/libraries/web-sockets
#define PWDN_GPIO_NUM     32
#define RESET_GPIO_NUM    -1
#define XCLK_GPIO_NUM      0
#define SIOD_GPIO_NUM     26
#define SIOC_GPIO_NUM     27
#define Y9_GPIO_NUM       35
#define Y8_GPIO_NUM       34
#define Y7_GPIO_NUM       39
#define Y6_GPIO_NUM       36
#define Y5_GPIO_NUM       21
#define Y4_GPIO_NUM       19
#define Y3_GPIO_NUM       18
#define Y2_GPIO_NUM        5
#define VSYNC_GPIO_NUM    25
#define HREF_GPIO_NUM     23
#define PCLK_GPIO_NUM     22

//替换成你的配置
const char* hostname = "ESP32CAM";
const char* ssid = "wifi名";
const char* password = "wifi密码";
const char* socket_url = "你的socket请求地址";
int socket_port = 你的端口;
WebSocketsClient webSocket;

void webSocketEvent(WStype_t type, uint8_t * payload, size_t length) {

  switch(type) {
    case WStype_DISCONNECTED:
      Serial.printf("[WSc] Disconnected!n");
      break;
    case WStype_CONNECTED: {
      Serial.printf("[WSc] Connected to url: %sn", payload);
      webSocket.sendTXT("camlogin");
    }
      break;
    case WStype_TEXT:
      Serial.printf("[WSc] get text: %sn", payload);
      break;
    case WStype_BIN:
      break;
    case WStype_PING:
        Serial.printf("[WSc] get pingn");
        break;
    case WStype_PONG:
        Serial.printf("[WSc] get pongn");
        break;
    }
}
void setupCamera()
{
    camera_config_t config;
    config.ledc_channel = LEDC_CHANNEL_0;
    config.ledc_timer = LEDC_TIMER_0;
    config.pin_d0 = Y2_GPIO_NUM;
    config.pin_d1 = Y3_GPIO_NUM;
    config.pin_d2 = Y4_GPIO_NUM;
    config.pin_d3 = Y5_GPIO_NUM;
    config.pin_d4 = Y6_GPIO_NUM;
    config.pin_d5 = Y7_GPIO_NUM;
    config.pin_d6 = Y8_GPIO_NUM;
    config.pin_d7 = Y9_GPIO_NUM;
    config.pin_xclk = XCLK_GPIO_NUM;
    config.pin_pclk = PCLK_GPIO_NUM;
    config.pin_vsync = VSYNC_GPIO_NUM;
    config.pin_href = HREF_GPIO_NUM;
    config.pin_sscb_sda = SIOD_GPIO_NUM;
    config.pin_sscb_scl = SIOC_GPIO_NUM;
    config.pin_pwdn = PWDN_GPIO_NUM;
    config.pin_reset = RESET_GPIO_NUM;
    config.xclk_freq_hz = 20000000;
    config.pixel_format = PIXFORMAT_JPEG;
    config.frame_size = FRAMESIZE_VGA; // FRAMESIZE_ + QVGA|CIF|VGA|SVGA|XGA|SXGA|UXGA
    config.jpeg_quality = 50;//图像质量（jpeg_quality) 可以是 0 到 63 之间的数字。数字越小意味着质量越高。然而，非常低的图像质量数字，特别是在更高的分辨率下，可能会导致 ESP32-CAM 崩溃或可能无法正常拍摄照片。
    config.fb_count = 1;
    // Init Camera
    esp_err_t err = esp_camera_init(&config);
    if (err != ESP_OK) {
      Serial.printf("Camera init failed with error 0x%x", err);
      return;
    }  
}

void setup(){
  Serial.begin(115200);
  // Connect to Wi-Fi
  WiFi.begin(ssid, password);
  while (WiFi.status() != WL_CONNECTED) {
    delay(1000);
    Serial.println("Connecting to WiFi..");
  }
  // Print ESP32 Local IP Address
  Serial.println(WiFi.localIP());
  setupCamera();
  // server address, port and URL
  webSocket.begin(socket_url,socket_port);
  webSocket.onEvent(webSocketEvent);
  webSocket.setReconnectInterval(5000);
  webSocket.enableHeartbeat(15000, 3000, 2); 
}
unsigned long messageTimestamp = 0;
void loop() {
    webSocket.loop();
    uint64_t now = millis();
    if(now - messageTimestamp > 10) {
        messageTimestamp = now;
        camera_fb_t * fb = NULL;
        // Take Picture with Camera
        fb = esp_camera_fb_get();  
        if(!fb) {
          Serial.println("Camera capture failed");
          return;
        }
        webSocket.sendBIn(fb->buf,fb->len);
        Serial.println("Image sent");
        esp_camera_fb_return(fb); 
    }
}

 微信小程序ts代码

Page({
  onLoad() {
    var that = this
    var webSoket = wx.connectSocket({
      url: 'ws://你的socket连接:端口',
    })
    webSoket.onMessage(onMessage => {
      var base64 = wx.arrayBufferToBase64(onMessage.data);
      that.setData({
        motto:`data:image/jpg;base64,${base64}` 
      })
    }) 
  }
})

微信小程序wxml代码 

 服务器php代码：文件名server.php

connect('127.0.0.1', 6379);
$redis->set("fd", "[]"); //每次第一次执行都需要先清空reids里面的标识
$server = new swoole_websocket_server("0.0.0.0", 你的端口);#要在腾讯云和宝塔中放行
$server->set([
                'daemonize' => true,//进程守护 可以后台运行
            ]);
$server->on('open', function (swoole_websocket_server $server, $request) use($redis) {
    $str = json_decode($redis->get("fd"), true);
    if($str == "") $str = [];
    if(!in_array($request->fd, $str)){
        array_push($str, $request->fd);
        $str = json_encode($str);
        $redis->set("fd", $str);
    }
});
$server->on('message', function (swoole_websocket_server $server, $frame) use($redis) {
    $str = json_decode($redis->get("fd"), true);
        foreach ($str as $key => $value) {
        if($frame->fd != $value){
            $server->push($value,$frame->data,WEBSOCKET_OPCODE_BINARY);
        }
    }
});
$server->on('close', function ($ser, $fd) use($redis) {
    $str = json_decode($redis->get("fd"), true);
    $point = array_keys($str, $fd, true);
    array_splice($str, $point['0'],1);
    $str = json_encode($str);
    $redis->set("fd", $str);
});
$server->start();

 运行php脚本

php server.php