在CAD 命令中画多段线的命令为：pline。下面将介绍一种JIG画多段线的方法。
首先，来介绍一下JIG这个东西。
EntityJig(实体动态预览)，按照指定步骤模仿特定类型的单个实体对象。首先，定义一个类，该类继承于： Autodesk.AutoCAD.EditorInput.EntityJig。继承该类后，需要重写两个方法。 protected override SamplerStatus Sampler(JigPrompts prompts)和 protected override bool Update()这两个方法。
与正常的Prompt一样需要处理JIG的Prompt。
在Sampler方法中编写如下代码：处理提示消息。并获得用户输入信息
JigPromptPointOptions jigOpts = new JigPromptPointOptions();
jigOpts.UserInputControls = (UserInputControls.Accept3dCoordinates |
UserInputControls.NullResponseAccepted |
UserInputControls.NoNegativeResponseAccepted);
在Update方法中更新每一次的拖拽。
完整代码如下：
public class ClsDrawJigLine : Autodesk.AutoCAD.EditorInput.EntityJig
{
#region 成员变量
public static int color = 0;
public static Point3dCollection m_pts;
Point3d m_tempPoint;
Plane m_plane;
#endregion
#region 构造方法
public ClsDrawJigLine(Matrix3d ucs)
: base(new Polyline())
{
m_pts = new Point3dCollection();
Point3d origin = new Point3d(0, 0, 0);
Vector3d normal = new Vector3d(0, 0, 1);
normal = normal.TransformBy(ucs);
m_plane = new Plane(origin, normal);
Polyline pline = Entity as Polyline;
pline.SetDatabaseDefaults();
pline.Normal = normal;
pline.ColorIndex = color;
pline.AddVertexAt(0, new Point2d(0, 0), 0, 0, 0);
}
#endregion
/// /// 画线
///
///
///
public Point3dCollection DragLine(int colorIndex)
{
return ClsDrawJigLine.PolyJig(colorIndex);
}
#region 画线方法
/// /// 画线
///
/// 颜色
///
public static Point3dCollection PolyJig(int colorIndex)
{
color = colorIndex;
Document doc = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument;
Editor ed = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.Editor;
Matrix3d ucs = ed.CurrentUserCoordinateSystem;
ClsDrawJigLine jig = new ClsDrawJigLine(ucs);
bool bSuccess = true, bComplete = false;
do
{
PromptResult res = ed.Drag(jig);
bSuccess = (res.Status == PromptStatus.OK);
if (bSuccess)
jig.AddLatestVertex();
if (res.Status != PromptStatus.OK)
{
Confirm frm = new Confirm();
frm.ShowDialog();
Confirm.Operate operateType = frm._operrateType;
switch (operateType)
{
case Confirm.Operate.Continue:
bSuccess = true;
bComplete = false;
break;
case Confirm.Operate.Back:
if (m_pts.Count > 0)
{
m_pts.RemoveAt(m_pts.Count - 1);
bSuccess = true;
bComplete = false;
jig.RemoveLastVertex();
}
break;
case Confirm.Operate.Accept:
break;
}
}
} while (bSuccess && !bComplete);
return m_pts;
}
#endregion
#region 用于在完成Drag后，移除最后个虚构的点
/// /// 用于在完成Drag后，移除最后个虚构的点
///
public void RemoveLastVertex()
{
Polyline pline = Entity as Polyline;
if (pline.NumberOfVertices > 1)
{
pline.RemoveVertexAt(m_pts.Count);
}
}
#endregion
#region 在添加一个点时激发事件
/// /// 事件委托
///
/// 事件参数
public delegate void AddHandle(EventArgs e);
public class EventArgs
{
public EventArgs(Point3dCollection currentPoints, int index)
{
this.currentPoints = currentPoints;
this.index = index;
}
/// /// 当前点集合
///
private Point3dCollection currentPoints;
/// /// 当前点集合
///
public Point3dCollection CurrentPoints
{
get { return currentPoints; }
}
/// /// 当前点索引
///
private int index;
/// /// 当前点索引
///
public int Index
{
get { return index; }
}
/// /// 是否取消点绘制
///
private bool isCancel = false;
/// /// 是否取消点绘制
///
public bool IsCancel
{
get { return isCancel; }
set { isCancel = value; }
}
}
/// /// 添加一个点时激发事件
///
public static event AddHandle AddPoint;
#endregion
#region 总是设置polyline为一个虚构的点，在完成Drag后，此点会被移除
/// /// 总是设置polyline为一个虚构的点，在完成Drag后，此点会被移除
///
public void AddLatestVertex()
{
m_pts.Add(m_tempPoint);
Polyline pline = Entity as Polyline;
pline.AddVertexAt(pline.NumberOfVertices, new Point2d(m_tempPoint.X, m_tempPoint.Y), 0, 0, 0);
if (AddPoint != null)
{
EventArgs e = new EventArgs(m_pts, m_pts.Count - 1);
e.IsCancel = false;
AddPoint(e);
if (e.IsCancel)
{
RemoveLastVertex();
}
}
}
#endregion
#region 取样
/// /// 取样
///
///
///
protected override SamplerStatus Sampler(JigPrompts prompts)
{
JigPromptPointOptions jigOpts = new JigPromptPointOptions();
jigOpts.UserInputControls = (UserInputControls.Accept3dCoordinates |
UserInputControls.NullResponseAccepted |
UserInputControls.NoNegativeResponseAccepted);
if (m_pts.Count == 0)
{
jigOpts.Message = "n请输入起点坐标 ";
}
else if (m_pts.Count > 0)
{
jigOpts.BasePoint = m_pts[m_pts.Count - 1];
jigOpts.UseBasePoint = true;
jigOpts.Message = "n请输入下一个点[或按ESC退出] ";
}
else
return SamplerStatus.Cancel;
PromptPointResult res = prompts.AcquirePoint(jigOpts);
if (m_tempPoint == res.Value)
{
return SamplerStatus.NoChange;
}
else if (res.Status == PromptStatus.OK)
{
m_tempPoint = res.Value;
return SamplerStatus.OK;
}
return SamplerStatus.Cancel;
}
#endregion
#region 更新
/// /// 更新
///
///
protected override bool Update()
{
Polyline pline = Entity as Polyline;
pline.SetPointAt(pline.NumberOfVertices - 1, m_tempPoint.Convert2d(m_plane));
Matrix3d m = Matrix3d.Displacement(new Vector3d(0, 0, 1000));
pline.TransformBy(m);
return true;
}
#endregion
}
其中confirm是一个窗体。用来和用户交互信息，实现交互操作
后台代码为：
/// ///
public partial class Confirm : Form
{
/// ///
// ARXClass _aRXClass = null;
#region 构造方法
/// /// 构造方法
///
public Confirm()
{
// _aRXClass = new ARXClass();
InitializeComponent();
}
#endregion
#region 操作类型
/// /// 操作类型
///
public enum Operate
{
/// /// 继续
///
Continue = 0,
/// /// 后退
///
Back = 1,
/// /// 确定
///
Accept = 2
}
#endregion
#region 类成员
/// /// 类成员
///
public Operate _operrateType = Operate.Continue;
#endregion
#region 点击继续按钮激发事件
/// /// 点击继续按钮激发事件
///
private void btnContinue_Click(object sender, EventArgs e)
{
this._operrateType = Operate.Continue;
this.Close();
}
#endregion
#region 点击回退按钮激发事件
/// /// 点击回退按钮激发事件
///
private void btnBack_Click(object sender, EventArgs e)
{
this._operrateType = Operate.Back;
this.Close();
}
#endregion
#region 点击确定按钮激发事件
/// /// 点击确定按钮激发事件
///
private void btnAccept_Click(object sender, EventArgs e)
{
// 确定
this._operrateType = Operate.Accept;
// 关闭窗体
this.Close();
}
#endregion
}
以上方法仅供参考。
若各位大侠手里有更好的方法，请顺便贴一下，谢谢。
如有问题：请加qq1419226548或QQmail给我。 若转载，请注明出处。谢谢。
