1 定义一个sequence，里面对应的寄存器配置；
class case0_cfg_vseq extends uvm_sequence;
`uvm_object_utils(case0_cfg_vseq)
`uvm_declare_p_sequencer(my_vsqr)
function new(string name= "case0_cfg_vseq");
super.new(name);
endfunction
virtual task body();
uvm_status_e status;
uvm_reg_data_t value;
if(starting_phase != null)
starting_phase.raise_objection(this);
p_sequencer.p_rm.invert.read(status, value, UVM_FRONTDOOR);
`uvm_info("case0_cfg_vseq", $sformatf("invert's initial value is %0h", value), UVM_LOW)
p_sequencer.p_rm.invert.write(status, 1, UVM_FRONTDOOR);
p_sequencer.p_rm.invert.read(status, value, UVM_FRONTDOOR);
`uvm_info("case0_cfg_vseq", $sformatf("after set, invert's value is %0h", value), UVM_LOW)
if(starting_phase != null)
starting_phase.drop_objection(this);
endtask
endclass
2 在uvm——test的类里面去 启动sequence
function void my_case0::build_phase(uvm_phase phase);
super.build_phase(phase);
uvm_config_db#(uvm_object_wrapper)::set(this,
"v_sqr.configure_phase",
"default_sequence",
case0_cfg_vseq::type_id::get());
uvm_config_db#(uvm_object_wrapper)::set(this,
"v_sqr.main_phase",
"default_sequence",
case0_vseq::type_id::get());
endfunction
理解：
rm.default_map.set_sequencer(env.bus_agt.sqr, reg_sqr_adapter);则定义了需要使用的是bus_sequencer; 因此在virsual sequence下，写寄存器的操作，之后在build_phase定义在v_sqr.configure_phase运行case0_cfg_vseq；
rm.default_map.set_auto_predict(1);
另外：对于write的参数 p_sequencer.p_rm.invert.write(status, 1, UVM_FRONTDOOR);
1的值对应的是 uvm_reg_data_t，未默认的64bit的数
`ifndef UVM_REG_ADDR_WIDTH
`define UVM_REG_ADDR_WIDTH 64
`endif
typedef bit unsigned [`UVM_REG_DATA_WIDTH-1:0] uvm_reg_data_t ;
因此对应的多域的寄存器，这个value = 多位段的值；
