华三交换机配置端口聚合之三层端口配置静态和动态聚合

华三交换机配置端口聚合之三层端口配置静态和动态聚合

一，配置三层端口静态聚合

创建端口三层聚合口

[SW1]interface Route-Aggregation 1
[SW1-Route-Aggregation1]ip add 10.1.1.1 24
[SW1-Route-Aggregation1]qu

分别把GE1/0/11,GE1/0/12加入到聚合组1

[SW1]interface GigabitEthernet 1/0/11
[SW1-GigabitEthernet1/0/11]port link-mode route
[SW1-GigabitEthernet1/0/11]port link-aggregation group 1

[SW1]interface GigabitEthernet 1/0/12
[SW1-GigabitEthernet1/0/12]port link-mode route
[SW1-GigabitEthernet1/0/12]port link-aggregation group 1

SWB

创建端口聚合口

[SW2]interface Route-Aggregation 1
[SW2-Route-Aggregation1]ip address 10.1.1.2 24

分别把GE1/0/11,GE1/0/12加入到聚合组1

[SW2]interface GigabitEthernet 1/0/11
[SW2-GigabitEthernet1/0/11]port link-mode route
[SW2-GigabitEthernet1/0/11]port link-aggregation group 1

[SW2]interface GigabitEthernet 1/0/12
[SW2-GigabitEthernet1/0/12]port link-mode route
[SW2-GigabitEthernet1/0/12]port link-aggregation group 1

使用命令display link-aggregation verbose查看聚合组信息

=============================================================

二，配置三层动态端口聚合

创建端口三层聚合口

[SW1]interface Route-Aggregation 1
[SW1-Route-Aggregation1]ip add 10.1.1.1 24
[SW1-Route-Aggregation1]link-aggregation mode dynamic //聚合为动态模式

分别把GE1/0/11,GE1/0/12加入到聚合组1

[SW1]interface GigabitEthernet 1/0/11
[SW1-GigabitEthernet1/0/11]port link-mode route
[SW1-GigabitEthernet1/0/11]port link-aggregation group 1

SWB

[SW2]interface Route-Aggregation 1
[SW2-Route-Aggregation1]ip address 10.1.1.2 24
[SW2-Route-Aggregation1]link-aggregation mode dynamic //聚合为动态模式

分别把GE1/0/11,GE1/0/12加入到聚合组1

[SW2]interface GigabitEthernet 1/0/11
[SW2-GigabitEthernet1/0/11]port link-mode route
[SW2-GigabitEthernet1/0/11]port link-aggregation group 1

[SW2]interface GigabitEthernet 1/0/12
[SW2-GigabitEthernet1/0/12]port link-mode route
[SW2-GigabitEthernet1/0/12]port link-aggregation group 1

使用命令display link-aggregation verbose查看聚合组信息