tar 软件包详细移植至arm

Linux开发环境 ：Ubuntu18.04
目标芯片：imx6ull
交叉编译工具版本：gcc-linaro-arm-linux-gnueabihf-4.9-2014.09_linux
交叉编译工具安装位置：/opt/gcc-linaro-arm-linux-gnueabihf-4.9-2014.09_linux/bin/

CC=/opt/gcc-linaro-arm-linux-gnueabihf-4.9-2014.09_linux/bin/arm-linux-gnueabihf-gcc
CCLD=/opt/gcc-linaro-arm-linux-gnueabihf-4.9-2014.09_linux/bin/arm-linux-gnueabihf-ld
RANLIB=/opt/gcc-linaro-arm-linux-gnueabihf-4.9-2014.09_linux/bin/arm-linux-gnueabihf-ranlib
AR=/opt/gcc-linaro-arm-linux-gnueabihf-4.9-2014.09_linux/bin/arm-linux-gnueabihf-ar

点击此处下载 tar软件包

https://blog.csdn.net/u011216417/article/details/46592149?ops_request_misc=%257B%2522request%255Fid%2522%253A%2522163663115816780366587078%2522%252C%2522scm%2522%253A%252220140713.130102334…%2522%257D&request_id=163663115816780366587078&biz_id=0&utm_medium=distribute.pc_search_result.none-task-blog-2_allbaidu_landing_v2~default-2-46592149.first_rank_v2_pc_rank_v29&utm_term=.%2Fconfigure&spm=1018.2226.3001.4187

1.对软件包进行配置生成Makefile

sudo ./configure  --host=arm-linux-gnueabihf --prefix=${pwd}/install CC=/opt/gcc-linaro-arm-linux-gnueabihf-4.9-2014.09_linux/bin/arm-linux-gnueabihf-gcc CCLD=/opt/gcc-linaro-arm-linux-gnueabihf-4.9-2014.09_linux/bin/arm-linux-gnueabihf-ld RANLIB=/opt/gcc-linaro-arm-linux-gnueabihf-4.9-2014.09_linux/bin/arm-linux-gnueabihf-ranlib  AR=/opt/gcc-linaro-arm-linux-gnueabihf-4.9-2014.09_linux/bin/arm-linux-gnueabihf-ar

2.make
3.make install

将文件夹bin、libexec 、share中的文件 全部复制到目标板usr/bin,usr/libexec,usr/share中。

本次操作测试了1.34版本，1.28版本。

希望对大家后续交叉编译工具移植工作有所帮助。