① 链路聚合
② 创建指定VLAN
③ 配置网关
vlan 500 to 505
vlan 1000 to 1063
创建9个桥接聚合组
interface Bridge-Aggregation 1 to 9（验证批量创建是否可行）
…
设置端口组
port-group manual 1
group-member Ten-GigabitEthernet 1/0/3 Ten-GigabitEthernet 1/0/17
port link-aggregation group 1 （设置这两个端口属于聚合组1）
exit
interface Bridge-Aggregation 1
port link-type access
port access vlan 500
port-group manual 2
group-member Ten-GigabitEthernet 1/0/4 Ten-GigabitEthernet 1/0/18
port link-aggregation group 2
exit
interface Bridge-Aggregation 2
port link-type access
port access vlan 500
…
补充：trunk指令
port link-type trunk
port trunk permit vlan 501 503 504 505 1000
interface Vlan-interface 500
ip address 1.28.96.225 255.255.255.224
interface Vlan-interface 1000
ip address 172.16.0.1 255.255.255.0
interface Vlan-interface 1001
ip address 172.16.1.1 255.255.255.0
interface Vlan-interface 1002
ip address 172.16.2.1 255.255.255.0
interface Vlan-interface 1003
ip address 172.16.3.1 255.255.255.0
interface Vlan-interface 1004
ip address 172.16.4.1 255.255.255.0
待补充
附录：H3C配置指令：---------------------系统---------------------
system-view
进入视图模式
exit 或者 q
返回上一层
sysname
设备命名
save
配置保存
undo
删除操作
---------------------vlan---------------------
display vlan
查看vlan概括信息
display vlan brief
查看vlan简明信息
vlan 10
创建vlan10
vlan 50 to 60
创建连续vlan
name Student
给vlan命名
interface GigabitEthernet 1/0/1
进入端口
port link-type access
端口模式选择(Access、Trunk、Hybrid)
port access vlan 10（在port处加入vlan）
配置端口加入vlan10
port GigabitEthernet 1/0/2 to GigabitEthernet 1/0/5（vlan处添加端口）
将连续的端口加入vlan
interface range GigabitEthernet 1/0/2 to GigabitEthernet 1/0/5（通过端口组统一配置）
建立临时range，然后可以统一进行端口设置
---------------------vlanif---------------------
interface Vlan-interface 20
进入vlan20管理端口
ip address 192.168.20.1 255.255.255.0
配置vlan20的管理ip地址
