英语翻译Measure a sample of 10 off ACME (2025PB422100) cores.Mea

学习 时间:2026-03-29 17:22:19 阅读:2997
英语翻译Measure a sample of 10 off ACME (2025PB422100) cores.Measure to MIL-STD 883 Method 2016.

最佳回答

无私的保温杯

悦耳的皮带

2026-03-29 17:22:19

嗯,最好有上下文。简单翻译如下:从 ACME (2025PB422100) cores中抽测10个样品。参考标准MIL-STD 883的 方法2016 。注:MIL-STD 883 为美国军用标准。以下仅供参考:MIL-STD-883G METHOD 2016 15 November 1974 1 METHOD 2016 PHYSICAL DIMENSIONS 1。PURPOSE。The purpose of this examination is to verify that the external physical dimensions of the device are in accordance with the applicable acquisition document。2。APPARATUS。Equipment used in this examination shall include micrometers,calipers,gauges,contour projectors,or other measuring equipment capable of determining the actual device dimensions specified in the applicable acquisition document。3。PROCEDURE。Unless otherwise specified,the physical dimensions on the case outline drawing shall be measured。3。1 Failure criteria。Any device which exhibits a dimension or dimensions outside the specified tolerances or limits shall constitute a failure。4。SUMMARY。The following detail shall be specified in the applicable acquisition document:External dimensions which are capable of physically describing the device (see 3)。Dimensions to be considered shall include case outline dimensions; special lead shapes (e。g。,required bend positions,angles of bend),where applicable; dimensions of any projecting or indented features used for coding of lead arrangement,automatic handling and similar purpose; and any other information which affects the installed size or orientation of the device in normal applications。 再问: 这位大哥,我是这样理解的:从10个这种型号ACME (2025PB422100) 的磁芯选一个用来测试,测试标准为MIL-STD 883 Method 2016。 请问这样理解对么?你给的标准版本是G版,现在最新的应该是H了吧。 再答: �������ǶԵġ������Ҷ����ǵIJ�Ʒ���������ܶԲ�Ʒ������ƫ� ��׼Ҳ�����������ѵģ������ο���

最新回答共有2条回答

  • 舒服的灰狼
    回复
    2026-03-29 17:22:19

    嗯,最好有上下文。简单翻译如下:从 ACME (2025PB422100) cores中抽测10个样品。参考标准MIL-STD 883的 方法2016 。注:MIL-STD 883 为美国军用标准。以下仅供参考:MIL-STD-883G METHOD 2016 15 November 1974 1 METHOD 2016 PHYSICAL DIMENSIONS 1。PURPOSE。The purpose of this examination is to verify that the external physical dimensions of the device are in accordance with the applicable acquisition document。2。APPARATUS。Equipment used in this examination shall include micrometers,calipers,gauges,contour projectors,or other measuring equipment capable of determining the actual device dimensions specified in the applicable acquisition document。3。PROCEDURE。Unless otherwise specified,the physical dimensions on the case outline drawing shall be measured。3。1 Failure criteria。Any device which exhibits a dimension or dimensions outside the specified tolerances or limits shall constitute a failure。4。SUMMARY。The following detail shall be specified in the applicable acquisition document:External dimensions which are capable of physically describing the device (see 3)。Dimensions to be considered shall include case outline dimensions; special lead shapes (e。g。,required bend positions,angles of bend),where applicable; dimensions of any projecting or indented features used for coding of lead arrangement,automatic handling and similar purpose; and any other information which affects the installed size or orientation of the device in normal applications。 再问: 这位大哥,我是这样理解的:从10个这种型号ACME (2025PB422100) 的磁芯选一个用来测试,测试标准为MIL-STD 883 Method 2016。 请问这样理解对么?你给的标准版本是G版,现在最新的应该是H了吧。 再答: �������ǶԵġ������Ҷ����ǵIJ�Ʒ���������ܶԲ�Ʒ������ƫ� ��׼Ҳ�����������ѵģ������ο���

上一篇 设x=3的m次方,y=27的m+2次方,用x的代数式表示y是

下一篇 瓜里加上偏旁成什么字